Volume: 2 qts. over stock Dimensions: Click here for dimensions. Number of Bolts: 14 Fits: This transmission pan fits:
This transmission pan works with these Dodge transmissions:
PML designed this pan to work with a variety of vehicles with these Dodge transmissions. PML added capacity and fins for cooling. This pan is only one inch deeper than the stock pan to maintain clearance on most vehicles. Dimensions are provide in above link and you should always check your vehicle for clearance before ordering a larger transmission pan. For 2007 and newer 6.7 Cummins diesel trucks, please see our Dodge 68RFE transmission pan. Four wheel drive Durango & Dakota will likely have exhaust and frame clearance problems with a deeper pan. Filter and Gasket InformationPML designed this pan to work with the stock filter and gasket. A filter extension is not needed with a PML pan. This pan is one inch deeper than stock and there is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan. | ||
DrainThe drain is on the driver's side of the vehicle shown at right. A magnetic drain plug and all mounting bolts are included with the pan. A hole for a temperature sending unit can optionally be machined also on the driver's side a few inches toward the rear of the vehicle from the drain plug. |
||
Installation on a 1997 Ram 2500These images show the installation of this pan on a 1997 Dodge Ram 2500 V10 4x4 truck. | ||
Adjacent image shows the heavy duty deep PML pan installed Old, beat up, stock pan on image at far left. Our thanks to Matt for choosing a PML pan and sending us pictures. |
||
PML Transmission Pan Features
Find out why you should buy a PML transmission pan. Gasket and filter not included (use stock parts). Learn more about finishes and construction of PML parts. |