PML GM 700R4, 4L60, 4L60E, Early Model Years, Deep  Transmission Pan - CJC Off Road
PML GM 700R4, 4L60, 4L60E, Early Model Years, Deep  Transmission Pan - CJC Off Road

PML GM 700R4, 4L60, 4L60E, Early Model Years, Deep Transmission Pan

8650-1

Regular price $310.00 Save $-310.00

0 in stock

Volume: 4.0 quarts over stock GM shallow pan

Dimensions: Click here for dimensions.

Number of Bolts: 16

This PML transmission pan fits the GM 700R4, 4L60, 4L60E transmissions.

PML designed this pan as a heavy duty, extra capacity replacement for the GM shallow pan that came with vehicles model year 1998 and older and a few vehicles, such as Camaro and Firebird up to 2002. The stock GM shallow pan and the stock GM deep pan are shown in the picture below.
PML GM 700R4, 4L60 early tranny pan, polished
The key distinguishing feature between the stock GM shallow pan and the stock GM deep pan is the step at the back of the pan. (Click on image to view larger.)

Note there are two versions of the stock GM shallow pan. They have the same depth. The older version is primarily found on 700R4 transmissions. This PML pan, part number 8650-1, can replace either style GM shallow pan.

PML GM 700R4, 4L60 early tranny pan, polished
Click on image to view larger.

You should always check your truck, SUV, or van to see which stock pan you have and look for clearance with exhaust and frame cross members. Generally, here are some examples of vehicles that this PML pan fits:

  • Blazer (mini), 1988 to 1998, i4, 2.8, or 4.3 engine
  • C10/K10, 1986 to 1987, 4.3, 305, or 350 engine
  • C1500/K1500, 1988 to 1995, 4.3, 5.0, or 5.7 engine
  • C2500/K2500, 1990 to 1999, 5.0 or 5.7 engine
  • Express, 1996 to 1998, 4.3, 4.8, 5.0, 5.3 or 5.7 engine
  • S10, 1988 to 1998, i4, 2.8, or 4.3 engine
  • S15, 1988 to 1998, i4, 2.8, or 4.3 engine
  • Savana, 1996 to 1998, 4.3, 4.8, 5.0, 5.3, or 5.7 engine
  • Sonoma, 1991 to 1998, i4 or 4.3 engine
  • Suburban 1500, 1986 to 1991, 350, 400, or 6.2 diesel engine
  • Suburban 1500, 1992 to 1998, 5.7 or 6.5 diesel engine
  • Tahoe, 1995 to 1998, 5.7 engine
  • Yukon, 1992 to 1998, 5.7 engine

These are the earlier models of these vehicles. The later year models have exhaust or frame cross members running under the pan and our later model year pan, part number 9427, is designed with a step for clearance on those vehicles.

Filter Information

PML designed this pan to work with the 700R4 and 4L60E filters that fit the stock GM shallow pan. Please see our Filter Guide for PML Part Number 8650-1.

Filter Supports, Temperature Sending Unit Locations and Drain Hole

PML GM 700R4, 4L60 pan inside
Click on image to view larger.

PML GM 700R4, 4L60 pan drain
Click on image to view larger.

Image at far left shows the the inside of the pan.

Image in the middle shows the drain hole.

The filter supports are the three cylinders in the middle of the pan on the inside. These filter supports are designed for the 700R4 and shallow 4L60E filters.

Optionally, this pan can be machined for a temperature sending unit. The pan has bosses on the passenger's side and the driver's side that can be machined. PML has a machine shop and can drill and tap to your specifications. Please call to order machining.

The drain is on the driver's side.

Shift Cable Mounting Bracket

You may have to modify your shift cable mounting bracket to use this pan. If the trans pan mounting bolts hold the shift cable bracket on, please reference this article from Vette magazine for details.

PML Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Find out why you should buy a PML transmission pan.

Gasket and filter not included (use stock parts).

Learn more about finishes and construction of PML parts.

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order over the phone if you would like machining.


Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)