Volume: 3.5 quarts over stock C5 pan Dimensions: Click here for dimensions. Number of Bolts: 16 PML designed this pan specifically for C5 Corvette owners who push their Corvettes to the limit and for owners who just want to take care of their Corvettes. This pan allows for adding transmission fluid through the pan as required by 4L60 transmission in the C5 Corvette. The fill hole is on the driver's side. A plug is included with hardware. FeaturesThis PML pan adds strength and aids in heat dissipation while maintaining ground clearance. It is a bolt-on replacement for the C5 Corvette stock pan. This PML pan features extra capacity and will hold 3½ quarts more than the stock pan. Heavy duty sand cast aluminum construction adds strength to the transmission case. The fins on the bottom of the pan and the extra capacity keep the fluid cool. Cooler running temperatures through expanded oil capacity and raised fins will help reduce wear and tear on the transmission. This pan is designed to fit 1997 to 2004 C5 Corvettes with the GM 4 speed automatic transmission. Please check your Corvette as configurations vary. The drain hole and magnetic drain plug allow for easy transmission servicing to keep your Corvette running smoothly. Filter InformationPML designed this pan to work with the stock filter for the C5 Corvette 4L60E transmission. The pan has cast-in filter supports so no filter extension is needed. Please see our Filter Guide for PML Part Number 8650-3 for suggested part numbers and additional information. Filter Supports, Temperature Sending Unit Locations and Drain HoleImage below shows the inside of this PML pan and the locations of the bosses that can be machined for a temperature sending unit. Also shown are filter supports, the drain hole and the fill hole. | ||
The fill and drain holes are on the driver's side. To avoid problems with filter extensions, PML cast filter supports into the bottom of the pan. See the section on filters. Optionally, this pan can be machined for a temperature sending unit. For those that need to monitor the temperature fluid temperatures, there are three bosses cast into the pan that can be machined, two on the passenger's side and one on the driver's side. PML has a machined shop and can drill and tap to your specifications. Please call to order machining. |
||
Shift Cable BracketYou may have to modify your shift cable mounting bracket to use this pan. If the trans pan mounting bolts hold the shift cable bracket on, please reference this article from Vette magazine for details. Gasket InformationThis Corvette transmission pan works with inexpensive stock gaskets, such as those made of cork or a rubber cork compound. The gasket flange is machined flat for a secure seal. PML Pan Compared to Stock Pan | ||
Image shows PML pan and stock pan. The PML pan is only 1/2 inch taller than the stock pan. |
||
2000 C5 Corvette with PML Transmission Pan Installed | ||
These pictures show this pan installed on a 2000 C5 Corvette. The PML pan bolts on in place f the stock pan. There is still ground clearance with the larger PML pans shown in middle image. |
||
PML Transmission Pan Features
Find out why you should buy a PML transmission pan. Gasket and filter not included (use stock parts). Learn more about finishes and construction of PML parts. If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order over the phone if you would like machining |