USA MADE // Carli is committed to production in the USA. Every single Carli Product is American made and sourced, down to the tape and boxes themselves.
TRACK BAR UPGRADE // For leveling kits, we highly recommend the addition of a Carli Suspension track bar to correct factory geometry, and upgrade the weak factory track bar bushings. While other brands use a polymer bushing, Carli uses an FK heim axle joint, and is the only brand to use an encapsulated 7/8″ Uniball joint on the frame side making this the nicest Dodge Ram track bar on the market.
This level kit offers a cost effective way to level your truck, at the lowest price point possible without sacrificing ride. Our kit pairs a set of 5100 shocks with Carli's soft ride 2.5" lift coils. The result dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory. This system also retains full factory payload and towing.
The front axle will be slightly pulled to the Driver’s side following installation of this level, which can be corrected with Carli's track bar.
This system fits Dodge Ram 2500 4x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and 2023 with factory rear coil springs. We offer these systems for Ram 2500s with factory rear air suspension.
We recommend a 35” tire on an 18” wheel that’s no more than 9” wide with 0 to +27 offset. To fit 37s on a Ram truck we recommend a +18 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
Recommended unloaded tire pressure is 45F/40R. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
INCLUDES
-Front standard Bilstein 5100 shocks
-Front Carli Linear Rate 2.5" Lift Coils
OPTIONAL
- Add matching standard 5100 rear shocks and or a Carli track bar
SPECIFICATIONS
-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Level Ride Height
INSTRUCTIONS:
Front Lift | Rear Lift | Front Travel | Rear Travel | Shock Diameter | Tire Fitment |
---|---|---|---|---|---|
2.5″ | 0″ | 9″ | 9″ | 2.0″ | 35″ / 37" |